What is the Correct Pressure for a Boiler in Bronx, NY? How Do I Fix Too Low or High Pressure?

Generally, the ideal boiler pressure is between 1 and 2 bars, but this may vary from boiler to boiler. Where the boiler pressure gauge is a useful tool, it does not detail everything you need to know about boiler pressure. For your boiler pressure to rise as it heats, and to fall as it cools is completely normal. Generally, the boiler pressure dials have green and red color-coded markers to indicate low and high boiler pressure. The pressure gauge is either on the front of your boiler or behind a control panel on most boilers from combi to traditional boilers. As part of the pipework, older boiler pressure gauges were usually underneath, and you needed an instruction manual to guide you. Today, we at New York Air Conditioning, Heating & Plumbing would like to discuss the basics of boiler pressure.

Low Boiler Pressure

Over several months of regular use, some boilers do slowly lose pressure. However, very little attention is needed with modern boilers although annual service is usually all that is required. By the temperature of the water circulating, you should be able to know that the boiler pressure is correct. Once or twice a year, boilers do need to be topped off. A sudden pressure drops, however, is a sign of a system leak. The most obvious sign there is a leak is seeing drips of water around the base of the boiler. It is wise to look for patches of damp along with all the pipework since sometimes the pipes may be at fault.

High Boiler Pressure

Due to overfilling, high boiler pressure with the needle in the red zone is typical. Additional causes to the problem are a fault in the system. You have an issue if your boiler is shutting down or won’t switch on. If this is occurring, you need to call in an expert immediately. The best course of action is with proper early diagnosis and resolution. For hot water and warmth in your home, keeping the correct boiler pressure is both safe efficient.

Common Boiler Pressure Problems & Solutions

Usually because the heating system boiler pressure is wrong is when there’s no heating or hot water. Unless the boiler pressure is in the right zone, your radiators won’t warm up properly.
Boiler Pressure is Too Low – Your heating system and hot water system will be caused to fail if boiler pressure is low, though it isn’t dangerous. Until the pressure in the system is just too low to operate small leaks happen very slowly drip by drip over time in some instances. While good for your heating eventually, removing air from radiators (called bleeding radiators), can also cause an immediate boiler pressure to drop and require a top-up. Once you’ve turned it off first, you can usually re-pressurize your boiler yourself.
Boiler Pressure Too High – The system can shut down with high boiler pressure. If your boiler has a pressure relief valve (PRV), it is not usually dangerous. Usually down a small pipe that runs to the outside, the boiler pressure valve lets water escape. When boiler pressure is too high, most systems shut down automatically. To diagnose problems, and restore your hot water quickly, you need an expert if the boiler pressures keep rising to the red zone.

Emergency Boiler Repair & More in Bedford Hills, Manhattan, Flushing, Queens, Brooklyn & The Bronx, New York

If you are having problems with your boiler in the Greater New York area, call in the experts of New York Air Conditioning, Heating & Plumbing and let us take care of the rest!

Call Now Button